Why We Need Hook Brake Pads Backing Plates?

Traditional Truck Brake Pads Backing Plates

-Not Enough Bonding Performance
-Easy to Cause Cracking On Brake Pads
-Not Suitable for High Speed Road Driving
-Not Enough For Heavy Load Trucks
-Can't Guarantee Your Safey During Driving

Advantages of Hook Type Brake Pads Backing Plates

- Higher Bonding Performance, No Need Gluing
-OE Quality Standards
- Keep Your Safety On Roads
-Suitable For Different Roads Conditions, High Speed and Moutainous Roads,etc.
- Longer Working Life of Brake Pads

Advantages of Hook Type Brake Pads Backing Plates

1. Height: 1.70mm±0.3mm
2. Shovel Mouth After Hook Provide Stronger Shear Strength
3. Width of Hooks: 2.0mm±0.2mm
4. Distance Between Hooks Lines: 4.0mm-6.0mm
5. Distance Between Two Hooks: 6.0mm


1. Using high-quality Q235B carbon steel, with high yield points at 235MPa, no possible to bend during the braking.

2. Thickness is uniform, flatness is controlled within 0.1-0.2mm; 

3. Quality is stable and consistent.

4. Molds are manufactured according to the FMSI standard drawings;

5.Strictly produced, accurate size to match for the OE brake capilers and brake discs; 

6. Perfectly fit in the caliper, thus reduce the noise caused by friction with the caliper accessories during braking.

Workshop of Brake Pads Hook Backing Plates



1. Neatly Stacked and Packed

All the backing plates will be neatly stacked into a wooden pallet, if backing plates with hooks, they will be stacked hooks to hooks to prevent the outer surface scratch.

2. Anti-rust Paper or Film

All the backing plates will be wrapped with anti-rust paper or film to prevent from moisture during the sea or air transportation.

3. Absorbent Drying Bag

Besides the anti-rust paper or film, absorbent drying bags will also be put into the pallet to absorb moisture during the transportation.

4. Fumigation-free Wooden Pallet

The raw material of the fumigation-free pallet is composite board or plywood, and the raw material is formed by high-temperature and high-pressure sterilization of various wooden residual materials.

5. Reasonable Wooden Pallet Structure

The wooden box adopts a reinforced structure, and there are reinforced wooden boards all around. The structure is optimized to make the whole wooden box more reasonable and firm, and it is not easy to fall apart and break.

6. Reinforcement Iron Sheet

There is iron sheet reinforcement around the wooden pallet to prevent it from falling apart due to the heavy steel backing plates.

7. Reinforced PET Packing Belt

After packing, the whole pallet will use Reinforced PET Packing Belt to make a third protection.

8. Outer Moisture Prevention Films

At last, the whole pallet will be covered by moisture prevention films to stop the rain or water during transportation in the first stage.

9. Shipping Mark on Pallet

There will be a shipping mark on each pallet for sea transportation and logistic purposes, also easy for you to trace and identify.

Shipments For Hook Type Brake Pads Backing Plates

We export about 300 Containers Each Year, Every Container Will Be Delivered To Customer's Hands Safely and Timely.

Message Board
verify code* click it to change
Contact Us

Working hours: 9:00-18:00 from Monday to Friday

Contact:Julie Yu



Address:No. 1136, East Tiaoxi Road, Qianyuan Town,Deqing County, Huzhou City,Zhejiang Province, China

Zhejiang Youai Auto Parts CO.,LTD.
Technical Support:YouDian Chaoming